Home | deutsch  | Legals | Sitemap | KIT

Current Publications (2017)


Theses
  1. Otten, S. J.
    Characterisation of REBCO Roebel cables. PhD dissertation.
    2019. KIT Scientific Publishing, Karlsruhe. doi:10.5445/KSP/1000091629
  2. Otten, S. J.
    Characterisation of REBCO Roebel cables. PhD dissertation.
    2019. KIT, Karlsruhe. doi:10.5445/IR/1000090970
Journal Articles
  1. Antunes, R.; Frances, L.; Incelli, M.; Santucci, A.
    Numerical study and experimental verification of protium permeation through Pd/Ag membranes for fusion applications [in press].
    2019. Fusion engineering and design. doi:10.1016/j.fusengdes.2019.02.060
  2. Bagrets, N.; Anvar, V. A.; Chiesa, L.; Delgado, M. A.; McRae, D. M.; Nijhuis, A.; Nishijima, G.; Osamura, K.; Shin, H. S.; Walsh, R. P.; Weiss, K.-P.; Zhang, Y.; Zhao, Y.; Zhao, Z.
    International round robin test for tensile testing HTS wires at cryogenic temperatures.
    2019. Superconductor science and technology, 32 (2), Art. Nr.: 024005. doi:10.1088/1361-6668/aaf619
  3. Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabó, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; Müller, F.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
    Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al.
    2019. Acta materialia. doi:10.1016/j.actamat.2019.07.001
  4. Coad, J. P.; Rubel, M.; Likonen, J.; Bekris, N.; Brezinsek, S.; Matthews, G. F.; Mayer, M.; Widdowson, A. M.
    Material migration and fuel retention studies during the JET carbon divertor campaigns.
    2019. Fusion engineering and design, 138, 78–108. doi:10.1016/j.fusengdes.2018.10.002
  5. Coleman, M.; Hörstensmeyer, Y.; Cismondi, F.
    DEMO tritium fuel cycle: performance, parameter explorations, and design space constraints.
    2019. Fusion engineering and design, 141, 79–90. doi:10.1016/j.fusengdes.2019.01.150
  6. De Sousa, W. T. B.; Kottonau, D.; Noe, M.
    Transient Simulation and Recovery Time of a Three-Phase Concentric HTS Cable.
    2019. IEEE transactions on applied superconductivity, 29 (5), 8649604. doi:10.1109/TASC.2019.2900937
  7. Frattolillo, A.; Baylor, L. R.; Bombarda, F.; Cismondi, F.; Colangeli, A.; Combs, S. K.; Day, C.; D’Elia, G.; Gebhart, T. E.; Iannone, F.; Lang, P. T.; Meitner, S. J.; Migliori, S.; Moro, F.; Mozzillo, R.; Pégourié, B.; Ploeckl, B.; Podda, S.; Poggi, F.
    Addressing the feasibility of inboard direct-line injection of high-speed pellets, for core fueling of DEMO.
    2019. Fusion engineering and design. doi:10.1016/j.fusengdes.2019.04.009
  8. Gao, P.; Wessel, W. A. J.; Dhallé, M.; Otten, S.; Kario, A. U.; Van Nugteren, J.; Kirby, G.; Bottura, L.; Ten Kate, H. H. J.
    Effect of resin impregnation on the transverse pressure dependence of the critical current in ReBCO Roebel cables.
    2019. Superconductor science and technology, 32 (5), Art.-Nr.: 055006. doi:10.1088/1361-6668/ab08bd
  9. Gliss, C.; Ambrosino, R.; Bachmann, C.; Ciattaglia, S.; Flammini, D.; Giegerich, T.; Jimenez, S.; Wilde, A.
    Initial integration concept of the DEMO lower horizontal port [in press].
    2019. Fusion engineering and design. doi:10.1016/j.fusengdes.2019.04.078
  10. Gomse, D.; Grohmann, S.
    Heat transfer and pressure drop in the main heat exchanger of a cryogenic mixed refrigerant cycle.
    2019. IOP conference series / Materials science and engineering, 502 (1), 012027. doi:10.1088/1757-899X/502/1/012027
  11. Grohmann, S.; Barthélémy, H.; Down, R.; Ercolani, E.; Fournel, J.-L.; Henriques, A.; Krichler, M.; Otte, W.; Parma, V.; Pengo, R.; Poncet, J.-M.; Reinhardt, M.; Soika, R.; Vallcorba-Carbonell, R.; Weber, C.; Zick, G.; Zoller, C.
    Status of a European Standard for the protection of helium cryostats against excessive pressure.
    2019. IOP conference series / Materials science and engineering, 502 (1), 012171. doi:10.1088/1757-899x/502/1/012171
  12. Heller, R.; Blanchier, P.; Fietz, W. H.; Wolf, M. J.
    Quench Analysis of the HTS CrossConductor for a Toroidal Field Coil.
    2019. IEEE transactions on applied superconductivity, 29 (7), 1–11. doi:10.1109/TASC.2019.2917154
  13. Heller, R.; Bau, H.; Nagel, M.; Rummel, T.
    Operation Experience of the Wendelstein 7-X High-Temperature Superconductor Current Leads.
    2019. IEEE transactions on applied superconductivity, 29 (6), Art. Nr.: 8603739. doi:10.1109/TASC.2019.2891163
  14. Hellmann, S.; Abplanalp, M.; Elschner, S.; Kudymow, A.; Noe, M.
    Current Limitation Experiments on a 1 MVA-Class Superconducting Current Limiting Transformer.
    2019. IEEE transactions on applied superconductivity, 29 (5), Article: 8675321. doi:10.1109/TASC.2019.2906804
  15. Iida, K.; Sugimoto, Y.; Hatano, T.; Urata, T.; Langer, M.; Holzapfel, B.; Hänisch, J.; Ikuta, H.
    Novel method to study strain effect of thin films using a piezoelectric-based device and a flexible metallic substrate.
    2019. Applied physics express, 12 (1), 016503. doi:10.7567/1882-0786/aaf6e6
  16. Koenen, T.; Undisz, A.; Otten, S.; Rettenmayer, M.
    Stainless Steel as Substrate Material for High Temperature Superconducting Tapes Processed via the ISD MgO Route.
    2019. IEEE transactions on applied superconductivity, 29 (4), Article: 6900309. doi:10.1109/TASC.2018.2872903
  17. Kubiczek, K.; Grilli, F.; Kario, A.; Godfrin, A.; Zermeno, V. M. R.; Stepien, M.; Kampik, M.
    Length Uniformity of the Angular Dependences of Ic and n of Commercial REBCO Tapes with Artificial Pinning at 77 K.
    2019. IEEE transactions on applied superconductivity, 29 (1), Article No.8000309. doi:10.1109/TASC.2018.2854673
  18. Lao, M.; Pahlke, P.; Sieger, M.; Falter, M.; Bäcker, M.; Hänisch, J.; Hühne, R.; Eisterer, M.
    Manifestation of granularity in the transport current of coated conductors.
    2019. Superconductor science and technology, 32 (5), Art.-Nr.: 055004. doi:10.1088/1361-6668/ab0677
  19. Lao, M.; Hänisch, J.; Kauffmann-Weiss, S.; Gehring, R.; Fillinger, H.; Drechsler, A.; Holzapfel, B.
    High current variable temperature electrical characterization system for superconducting wires and tapes with continuous sample rotation in a split coil magnet.
    2019. Review of scientific instruments, 90 (1), Art. Nr.: 015106. doi:10.1063/1.5078447
  20. Liu, Y.; Ou, J.; Grilli, F.; Schreiner, F.; Zermeno, V. M. R.; Zhang, M.; Noe, M.
    Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil.
    2019. Superconductor science and technology, 32 (1), 014001/1–12. doi:10.1088/1361-6668/aae960
  21. Pardo, E.; Grilli, F.; Liu, Y.; Wolftadler, S.; Reis, T.
    AC Loss Modeling in Superconducting Coils and Motors with Parallel Tapes as Conductor.
    2019. IEEE transactions on applied superconductivity, 29 (5), Art.-Nr.: 5202505. doi:10.1109/TASC.2019.2899148
  22. Preuss, A.; Wolf, M. J.; Heiduk, M.; Lange, C.; Fietz, W. H.
    Production and Characterization of Strands for a 35 kA HTS DC Cable Demonstrator.
    2019. IEEE transactions on applied superconductivity, 29 (5), 1–5. doi:10.1109/TASC.2019.2909208
  23. Reinking, J.; Schlösser, M.; Hase, F.; Orphal, J.
    First high-resolution spectrum and line-by-line analysis of the 2ν band of HTO around 3.8 microns.
    2019. Journal of quantitative spectroscopy & radiative transfer, 230, 61–64. doi:10.1016/j.jqsrt.2019.03.017
  24. Rijckaert, H.; Hänisch, J.; Pollefeyt, G.; Bäcker, M.; Van Driessche, I.
    Influence of Ba²⁺ Consumption and Intermediate Dwelling during Processing of YBa₂Cu₃O₇ Nanocomposite Films.
    2019. Journal of the American Ceramic Society, 102 (7), 3870–3878. doi:10.1111/jace.16228
  25. Riva, N.; Richard, S.; Sirois, F.; Lacroix, C.; Dutoit, B.; Grilli, F.
    Overcritical Current Resistivity of YBCO-Coated Conductors Through Combination of PCM and Finite-Element Analysis.
    2019. IEEE transactions on applied superconductivity, 29 (5), Art.-Nr.: 6601705. doi:10.1109/TASC.2019.2902038
  26. Röllig, M.; Aso, T.; Hara, M.; Priester, F.
    Galet – Benchmark of a Geant4 based application for the simulation and design of Beta Induced X-ray Spectrometry systems.
    2019. Fusion engineering and design, 143, 91–98. doi:10.1016/j.fusengdes.2019.03.086
  27. Santucci, A.; Antunes, R.; Bruni, G.; Mallozzi, F.; Incelli, M.; Sansovini, M.
    Recent achievements of the Pd-Ag membrane technologies in tritium extraction system applications [in press].
    2019. Fusion engineering and design. doi:10.1016/j.fusengdes.2019.03.162
  28. Shabagin, E.; Grohmann, S.
    Development of 10 kA Current Leads Cooled by a Cryogenic Mixed-Refrigerant Cycle.
    2019. IOP conference series / Materials science and engineering, 502 (1), 012138. doi:10.1088/1757-899x/502/1/012138
  29. Shen, B.; Coombs, T.; Grilli, F.
    Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission.
    2019. IEEE transactions on applied superconductivity, 29 (2), Art. Nr.: 8536400. doi:10.1109/TASC.2018.2881491
  30. Sirois, F.; Grilli, F.; Morandi, A.
    Comparison of Constitutive Laws for Modeling High-Temperature Superconductors.
    2019. IEEE transactions on applied superconductivity, 29 (1), Art. Nr.: 8000110. doi:10.1109/TASC.2018.2848219
  31. Tamson, J.; Stamm, M.; Grohmann, S.
    Set-up of the cryogenic phase equilibria test stand CryoPHAEQTS.
    2019. IOP conference series / Materials science and engineering, 502 (1), 012087. doi:10.1088/1757-899x/502/1/012087
  32. Varoutis, S.; Igitkhanov, Y.; Day, C.
    Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency.
    2019. Nuclear materials and energy, 19, 120–123. doi:10.1016/j.nme.2019.02.021
  33. Wang, Y.; Zhang, M.; Grilli, F.; Zhu, Z.; Yuan, W.
    Study of the magnetization loss of CORC cables using 3D T-A formulation.
    2019. Superconductor science and technology, 32, 025003/1–13. doi:10.1088/1361-6668/aaf011
  34. Weber, C.; Henriques, A.; Grohmann, S.
    Study on the heat transfer of helium cryostats following loss of insulating vacuum.
    2019. IOP conference series / Materials science and engineering, 502 (1), 012170. doi:10.1088/1757-899x/502/1/012170
Presentations
  1. Aker, M.; Röllig, M.
    Material studies to reduce the tritium memory effect in BIXS analytic systems.
    2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  2. Cismondi, F.; Boccaccini, L. V.; Chiovaro, P.; Ciattaglia, S.; Day, C.; Del Nevo, A.; Di Maio, P. A.; Federici, G.; Hernandez, F.; Moreno, C.; Moscato, I.; Rapisarda, D.; Santucci, A.; Spagnuolo, G. A.; Utili, M.
    Progress of the conceptual design of the European DEMO Breeding Blanket, Tritium Extraction and Coolant Purification Systems.
    2019. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019
  3. KATRIN Collaboration; Descher, M.
    Data aquisition systematic effects for sterile neutrino search at KATRIN.
    2019, March. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  4. Giegerich, T.; Battes, K.; Day, C.
    Lithium enrichment needs for fusion and fission applications.
    2019. TRANSAT 1st Tritium School, Ljubljana, SLO, March 25-28, 2019
  5. Giegerich, T.; Day, C.; Gliss, C.; Hanke, S.; Härtl, T.; Hörstenmeyer, Y.; Ionescu-Bujor, M.; Müller, R.; Peters, B.; Scannapiego, M.; Strobel, H.
    Design status of the torus vacuum pumping system for tritium processing in the EU-DEMO.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  6. Größle, R.; Brunst, T.; Krasch, B.; Mirz, S.
    High purity HD for cross calibration of hydrogen isotopologue analytics.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  7. KATRIN Collaboration; Hickford, S.
    Towards a neutrino mass measurement with the KATRIN experiment.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  8. KATRIN Collaboration; Hinz, D.
    Ionisation of Pb-210 induced Rydberg atoms in the KATRIN experiment.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  9. KATRIN Collaboration; Korzeczec, M.
    Investigation of detector effects for a sterile neutrino search at KATRIN.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  10. Krasch, B.; Größle, R.; Kuntz, D.; Mirz, S.
    Design of a cryostat for spectroscopic investigation of all hydrogen isotopologues in the liquid phase.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  11. Krause, M.; Wolf, J.
    Improved model for transmission probabilities of edge-welded bellows based on TPMC simulations.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Vakuumphysik und VakuumTechnik (2019), Regensburg, Germany, March 31–April 5, 2019
  12. Mirz, S.; Groessle, R.
    Investigation of line shapes and band structure in IR absorption spectra of a liquid and gaseous concentrated HD sample.
    2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  13. KATRIN Collaboration; Sack, R.; Rodenbeck, C.
    Measurement of KATRINs energy loss function using a time of flight method.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  14. KATRIN Collaboration; Schlösser, M.
    From first tritium data towards neutrino mass measurements with the KATRIN exeriment.
    2019. DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK), Fachverband Physik der Hadronen und Kerne (2019), Munich, Germany, March 17–22, 2019
  15. KATRIN Collaboration; Schmid, S.
    Characterization of the KATRIN detector wafers with the iron bird test setup.
    2019, March. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  16. KATRIN Collaboration; Seitz-Moskaliuk, H.
    Results of the commissioning of the gaseous Kr-83m calibration source of KATRIN.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  17. Tamson, J.; Stamm, M.; Grohmann, S.
    Aufbau des Cryogenic Phase Equilibria Test Stand CryoPHAEQTS.
    2019, November 23. Deutsche Kälte- und Klimatagung, Aachen, 21. - 23.November 2018
  18. Varoutis, S.; Igitkhanov, Y.; Day, C.; Innocente, P.; Subba, F.; Ambrosino, R.; Reimerdes, H.
    Assessment of the pumping efficiency in DEMO alternative divertor configurations.
    2019. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Jacksonville, FL, USA, June 2–6, 2019
  19. Welte, S.; Hillesheimer, D.; Le, L. T.; Schäfer, S.; Fanghänel, E.; Priester, F.; Sturm, M.
    Tritium supply and processing for the first KATRIN tritium operation.
    2019, April. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
Posters
  1. Antunes, R.; Frances, L.; Incelli, M.; Santucci, A.
    Sensitivity analysis and dimensioning of reactor-scale Pd/Ag permeators for the tritium extraction and removel system of the EU-HCPB blanket.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  2. KATRIN Collaboration; Block, F.; Osipowicz, A.
    Determination of analysis plane magnetic field in the KATRIN main spectrometer.
    2019. DPG-Frühjahrstagung, Fachverband Teilchenphysik (2019), Aachen, Germany, March 25–29, 2019
  3. Fischer, U.; Bachmann, C.; Cismondi, F.; Coleman, M.; Day, C.; Hörstensmeyer, Y.; Moro, F.; Pereslavtsev, P.
    Required and Achievable TBR for the European DEMO.
    2019. 14th International Symposium on Fusion Nuclear Technology (ISFNT 2019), Budapest, Hungary, September 22–27, 2019
  4. Hörstenmeyer, Y.; Tosti, S.; Santucci, A.; Bruni, G.
    Permeator simulation for the EU-DEMO fuel cycle.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  5. Igitkhanov, Y.; Day, C.
    Assessment of tritium inventory in DEMO steady state burning plasma.
    2019. 28th IEEE Symposium on Fusion Engineering (SOFE 2019), Jacksonville, FL, USA, June 2–6, 2019
  6. Neugebauer, C.; Hörstenmeyer, Y.; Day, C.
    Technology development for isotope rebalancing and protium removel in the EU-DEMO fuel cycle.
    2019. 12th International Conference on Tritium Science and Technology (Tritium 2019), Busan, South Korea, April 22–26, 2019
  7. Schneidewind, S.; Blaschtschak, J.; Aker, M.; Fleischmann, A.; Gastaldo, L.; Reifenberger, A.; Schlösser, M.
    Investigation of hydrogen gas sorption in thin metal films using a quartz crystal micro balance.
    2019. DPG-Frühjahrstagung der Sektion Kondensierte Materie (SKM), Fachverband Dünne Schichten (2019), Regensburg, Germany, March 31–April 5, 2019
  8. Wolf, M. J.; Fietz, W. H.; Heller, R.; Weiss, K. P.
    HTS crossconductor - a high current conductor for future fusion machines.
    2019. Discussion Meeting ’Fusion energy using tokamaks: can development be accelerated?’ (2019), London, United Kingdom, March 26–27, 2019