Home | deutsch  | Legals | Sitemap | KIT

Publications 2013


Book Chapters
  1. Day, C.
    Kryotechnik und Kryopumpen.
    2013. Jousten, K. [Hrsg.] Wutz Handbuch Vakuumtechnik Wiesbaden : Springer Vieweg, 2013, 523–577
  2. Ramalingam, R.; Neumann, H.
    Measurement of temperature distribution in multilayer insulations between 77 and 300 K using fiber Bragg grating sensor.
    2013. Iniewski, K. [Hrsg.] Smart Sensors for Industrial Applications Boca Raton : Taylor & Francis, 2013 (Devices, Circuits, and Systems)
Journal Articles
  1. Bagrets, N.; Goldacker, W.; Jung, A.; Weiss, K. P.
    Thermal properties of REBCO copper stabilized superconducting tapes.
    2013. IEEE Transactions on Applied Superconductivity, 23, 6600303/1–3. doi:10.1109/TASC.2012.2233268
  2. Barth, C.; Bagrets, N.; Weiss, K. P.; Bayer, C. M.; Bast, T.
    Degradation free epoxy impregnation of REBCO coils and cables.
    2013. Superconductor Science and Technology, 26, 055007/1–10. doi:10.1088/0953-2048/26/5/055007
  3. Barth, C.; Weiss, K. P.; Vojenciak, M.; Schlachter, S.
    Electro-mechanical analysis of Roebel cables with different geometries.
    2013. Superconductor Science and Technology, 25, 025007/1–9. doi:10.1088/0953-2048/25/2/025007
  4. Bornschein, B.; Day, C.; Demange, D.; Pinna, T.
    Tritium management and safety issues in ITER and DEMO breeding blankets.
    2013. Fusion Engineering and Design, 88, 466–471. doi:10.1016/j.fusengdes.2013.03.032
  5. Brambilla, R.; Grilli, F.; Martini, L.
    Critical state solution and alternating current loss computation of polygonally arranged thin superconducting tapes.
    2013. Applied physics letters, 103, 092602/1–4. doi:10.1063/1.4819487
  6. Day, C.; Giegerich, T.
    The direct internal recycling concept to simplify the fuel cycle of a fusion power plant.
    2013. Fusion Engineering and Design, 88, 616–620. doi:10.1016/j.fusengdes.2013.05.026
  7. Demange, D.; Borisevich, O.; Gramlich, N.; Wagner, R.; Welte, S.
    Zeolite membranes and palladium membrane reactor for tritium extraction from the breeder blankets of ITER and DEMO.
    2013. Fusion Engineering and Design, 88, 2396–2399. doi:10.1016/j.fusengdes.2013.05.102
  8. Dremel, M.; Pearce, R.; Strobel, H.; Hauer, V.; Day, C.; Wikus, P.; Papastergiou, S.
    The new build to print design of the ITER torus cryopump.
    2013. Fusion Engineering and Design, 88, 760–763. doi:10.1016/j.fusengdes.2013.02.026
  9. Drotziger, S.; Buscher, K. P.; Fietz, W. H.; Heiduk, M.; Heller, R.; Hollik, M.; Lange, C.; Lietzow, R.; Moennich, T.; Richter, T.; Rummel, T.
    Overview of results from Wendelstein7-X HTS current lead testing.
    2013. Fusion Engineering and Design, 88, 1585–1588. doi:10.1016/j.fusengdes.2013.01.104
  10. Fietz, W. H.; Barth, C.; Drotziger, S.; Goldacker, W.; Heller, R.; Schlachter, S. I.; Weiss, K. P.
    Prospects of high temperature superconductors for fusion magnets and power applications.
    2013. Fusion Engineering and Design, 88, 440–445. doi:10.1016/j.fusengdes.2013.03.059
  11. Fietz, W. H.; Fink, S.; Kraft, G.; Scheller, H.; Urbach, E.; Zwecker, V.
    High voltage testing of ITER prototype axial breaks.
    2013. IEEE Transactions on Applied Superconductivity, 23, 4200604/1–4. doi:10.1109/TASC.2012.2234177
  12. Fink, S.; Fietz, W. H.; Kraft, G.; Scheller, H.; Urbach, E.; Zwecker, V.
    Paschen testing of ITER prototype cryogenic axial breaks.
    2013. Fusion Engineering and Design, 88, 1475–1477. doi:10.1016/j.fusengdes.2012.11.028
  13. Fuchs, G.; Häßler, W.; Nenkov, K.; Scheiter, J.; Perner, O.; Handstein, A.; Kanai, T.; Schultz, L.; Holzapfel, B.
    High trapped fields in bulk MgB₂ prepared by hot pressing of ball-milled precursor powder.
    2013. Superconductor Science and Technology, 26, 122002/1–6. doi:10.1088/0953-2048/26/12/122002
  14. Giegerich, T.; Day, C.
    Conceptuation of a continuosly working vacuum pump train for fusion power plants.
    2013. Fusion Engineering and Design, 88, 2206–2209. doi:10.1016/j.fusengdes.2013.05.019
  15. Grilli, F.; Brambilla, R.; Sirois, F.; Stenvall, A.; Memiaghe, S.
    Development of a three-dimensional finite-element model for high-temperature superconductors based on the H-formulation.
    2013. Cryogenics, 53, 142–147. doi:10.1016/j.cryogenics.2012.03.007
  16. Grilli, F.; Zermeno, V.; Vojenciak, M.; Pardo, E.; Kario, A.; Goldacker, W.
    AC losses of pancake coils made of Roebel cable.
    2013. IEEE Transactions on Applied Superconductivity, 23, 5900205/1–5. doi:10.1109/TASC.2013.2238987
  17. Grohmann, S.; Bode, T.; Hötzel, M.; Schön, H.; Süßer, M.; Wahl, T.
    The thermal behaviour of the tritium source in KATRIN.
    2013. Cryogenics, 55-56, 5–11. doi:10.1016/j.cryogenics.2013.01.001
  18. Härö, E.; Stenvall, A.; Lecrevisse, T.; Fleiter, J.; Rey, J. M.; Sorbi, M.; Devaux, M.; Trophime, C.; Fazilleau, P.; Volpini, G.; Tixador, P.; Hornung, F.; Pes, C.
    Quench considerations and protection scheme of a high field HTS dipole insert coil.
    2013. IEEE Transactions on Applied Superconductivity, 23, 4600104/1–4. doi:10.1109/TASC.2012.2228890
  19. Heller, R.; Buscher, K. P.; Drotziger, S.; Fietz, W. H.; Kienzler, A.; Lietzow, R.; Mönnich, T.; Richter, T.; Rummel, T.; Urbach, E.
    Status of series production and test of the HTS current leads for Wendelstein 7-X.
    2013. Fusion Engineering and Design, 88 (9–10), 1482–1485. doi:10.1016/j.fusengdes.2013.02.074
  20. Hobl, A.; Goldacker, W.; Dutoit, B.; Martini, L.; Petermann, A.; Tixador, P.
    Design and production of the ECCOFLOW resistive fault current limiter.
    2013. IEEE Transactions on Applied Superconductivity, 23, 5601804/1–4. doi:10.1109/TASC.2013.2238288
  21. Hollik, M.; Fietz, W. H.; Fink, S.; Gehrlein, M.; Heller, R.; Lange, C.; Möhring, T.
    Design of electronic measurement and quench detection equipment for the current lead test facility Karlsruhe (CuLTKa).
    2013. Fusion Engineering and Design, 88, 1445–1448. doi:10.1016/j.fusengdes.2013.02.082
  22. Holubek, T.; Casalbuoni, S.; Gerstl, S.; Grau, A.; Saez de Jauregui, D.; Goldacker, W.; Nast, R.
    Magnetic Performance of a Laser Structured YBCO Tape Suitable for Insertion Devices Technology.
    2013. IEEE Transactions on Applied Superconductivity, 23 (3), 4602204/1–4. doi:10.1109/TASC.2013.2239691
  23. James, T. M.; Schlösser, M.; Fischer, S.; Sturm, M.; Bornschein, B.; Lewis, R. J.; Telle, H. H.
    Accurate depolarization ratio measurements for all diatomic hydrogen isotopologues.
    2013. Journal of Raman Spectroscopy, 44, 857–865. doi:10.1002/jrs.4283
  24. James, T. M.; Schlösser, M.; Lewis, R. J.; Fischer, S.; Bornschein, B.; Telle, H. H.
    Automated quantitative spectroscopic analysis combining background subtraction, cosmic ray removal, and peak fitting.
    2013. Applied Spectroscopy, 67, 949–959. doi:10.1366/12-06766
  25. Kamada, Y.; Barabaschi, P.; Ishida, S.; JT-60SA Team.
    Progress of the JT-60SA project.
    2013. Nuclear Fusion, 53, 104010/1–17. doi:10.1088/0029-5515/53/10/104010
  26. Kamaruzaman, N. B.; Brighenti, F.; Brandner, J. J.; Saat, A.
    Prediction of micro surface cooler performance for different rectangular type microchannels dimensions.
    2013. International Journal of Heat and Fluid Flow, 44, 644–651. doi:10.1016/j.ijheatfluidflow.2013.09.005
  27. Kario, A.; Vojenciak, M.; Grilli, F.; Kling, A.; Ringsdorf, B.; Walschburger, U.; Schlachter, S. I.; Goldacker, W.
    Investigation of a Rutherford cable using coated conductor Roebel cables as strands.
    2013. Superconductor Science and Technology, 26, 085019/1–6. doi:10.1088/0953-2048/26/8/085019
  28. Krüger, P.; Grilli, F.; Vojenciak, M.; Zermeno, V. M. R.; Demencik, E.; Farinon, S.
    Superconductor/ferromagnet heterostructures exhibit potential for significant reduction of hysteretic losses.
    2013. Applied Physics Letters, 102, 202601/1–4. doi:10.1063/1.4807136
  29. Lange, C.; Fietz, W. H.; Gröner, F.
    Influence of contact surface quality and contact material on the contact resistance of high current connections.
    2013. Fusion Engineering and Design, 88, 1581–1584. doi:10.1016/j.fusengdes.2013.01.049
  30. Leys, P.; Kläser, M.; Schleissinger, F.; Schneider, T.
    Angle-dependent U(I) measurements of HTS coated conductors.
    2013. IEEE Transactions on Applied Superconductivity, 23, 8000604/1–4. doi:10.1109/TASC.2012.2232700
  31. Micheling, R.; Bekris, N.; Cristescu, I.; Lohr, N.; Plusczyk, C.; Welte, S.; Wendel, J.
    Water detritation processing of JET purified waste water using the TRENTA facility at tritium laboratory Karlsruhe.
    2013. Fusion Engineering and Design, 88 (9-10), 2361–2365. doi:10.1016/j.fusengdes.2013.05.070
  32. Näckel, O.; Noe, M.
    Conceptual design study of an air coil fault current limiter.
    2013. IEEE Transactions on Applied Superconductivity, 23, 5602404/1–4. doi:10.1109/TASC.2012.2234171
  33. Nürnberg, A.; Schneider, T.
    Lorentz angle measurements as part of the sensor R&D for the CMS tracker upgrade.
    2013. Journal of Instrumentation, 8, C01001. doi:10.1088/1748-0221/8/01/C01001
  34. Ochoa Guaman, S.; Hanke, S.; Day, C.
    Heat transfer enhancemenbt of NBI vacuum pump cryopanels.
    2013. Fusion Engineering and Design, 88, 882–886. doi:10.1016/j.fusengdes.2013.02.111
  35. Plusczyk, C.; Bekris, N.; Cristescu, I.; Lohr, N.; Michling, R.; Moosmann, H.; Welte, S.
    Experimental assessment of a catalytic hydrogen oxidation system for the off-gas processing of the ITER WDS.
    2013. Fusion Engineering and Design, 88, 2332–2335. doi:10.1016/j.fusengdes.2013.05.104
  36. Priester, F.; Bornschein, B.
    TriTop - a compatibility experiment with turbomolecular pumps under tritium atmosphere.
    2013. Vacuum, 98, 22–28. doi:10.1016/j.vacuum.2012.09.006
  37. Prikhna, T.; Eisterer, M.; Weber, H. W.; Gawalek, W.; Chaud, X.; Sokolovsky, V.; Moshchil, V.; Kozyrev, A.; Sverdun, V.; Kuznietsov, R.; Habisreuther, T.; Karpets, M.; Kovylaev, V.; Noudem, J.; Rabier, J.; Joulain, A.; Goldacker, W.; Basyuk, T.; Tkach, V.; Dellith, J.; Schmidt, C.; Shaternik, A.
    Pinning in MgB₂- and YBaCuO-based superconductors: Effect of manufacturing pressure and temperature.
    2013. IEEE Transactions on Applied Superconductivity, 23, 8001605/1–5. doi:10.1109/TASC.2013.2237736
  38. Qin, J.; Weiss, K. P.; Wu, Y.; Liao, G.; Wu, Z.; Li, L.; Li, H.; Niu, E.
    Mechanical test on the ITER CC and Feeder jacket.
    2013. Fusion Engineering and Design, 88, 151–155. doi:10.1016/j.fusengdes.2013.01.089
  39. Qin, J.; Wu, Y.; Yu, M.; Liu, B.; Liu, H.; Weiss, K. P.; Li, L.; Li, H.; Niu, E.; Bruzzone, P.
    Manufacture of ITER feeder sample conductors.
    2013. Fusion Engineering and Design, 88, 1461–1464. doi:10.1016/j.fusengdes.2013.01.008
  40. Rizzo, E.; Bauer, R.; Heller, R.; Savoldi Richard, L.; Zanino, R.
    1-D thermal-electrical analysis of the high temperature superconducting current leads for the ITER magnet system from 5 K to 300 K.
    2013. Fusion Engineering and Design, 88, 3125–3131. doi:10.1016/j.fusengdes.2013.09.001
  41. Rizzo, E.; Heller, R.; Savoldi Richard, L.; Zanino, R.
    Computational thermal-fluid dynamics analysis of the laminar flow regime in the meander flow geometry characterizing the heat exchanger used in high temperature superconducting current leads.
    2013. Fusion Engineering and Design, 88, 2749–2756. doi:10.1016/j.fusengdes.2013.02.007
  42. Rizzo, E.; Heller, R.; Savoldi Richard, L.; Zanino, R.
    CtFD-based correlations for the thermal-hydraulics of an HTS current lead meander-flow heat exchanger in turbulent flow.
    2013. Cryogenics, 53, 51–60. doi:10.1016/j.cryogenics.2012.06.001
  43. Röllig, M.; Priester, F.; Babutzka, M.; Bonn, J.; Bornschein, B.; Drexlin, G.; Ebenhöch, S.; Otten, E. W.; Steidl, M.; Sturm, M.
    Activity monitoring of a gaseous tritium source by beta induced X-ray spectrometry.
    2013. Fusion Engineering and Design, 88, 1263–1266. doi:10.1016/j.fusengdes.2012.11.001
  44. Schlösser, M.; Rupp, S.; Seitz, H.; Fischer, S.; Bornschein, B.; James, T. M.; Telle, H. H.
    Accurate calibration of the laser Raman system for the Karlsruhe Tritium Neutrino Experiment.
    2013. Journal of molecular structure, 1044, 61–66. doi:10.1016/j.molstruc.2012.11.022
  45. Schlösser, M.; James, T. M.; Fischer, S.; Lewis, R. J.; Bornschein, B.; Telle, H. H.
    Evaluation method for Raman depolarization measurements including geometrical effects and polarization aberrations.
    2013. Journal of Raman Spectroscopy, 44, 453–462. doi:10.1002/jrs.4201
  46. Schlösser, M.; Seitz, H.; Rupp, S.; Herwig, P.; Alecu, C. G.; Sturm, M.; Bornschein, B.
    In-line calibration of Raman systems for analysis of gas mixtures of hydrogen isotopologues with sub-percent accuracy.
    2013. Analytical Chemistry, 85, 2739–2745. doi:10.1021/ac3032433
  47. Souc, J.; Gömöry, F.; Kovac, J.; Nast, R.; Jung, A.; Vojenciak, M.; Grilli, F.; Goldacker, W.
    Low AC loss cable produced from transposed striated CC tapes.
    2013. Superconductor Science and Technology, 26, 075020/1–5. doi:10.1088/0953-2048/26/7/075020
  48. Stenvall, A.; Grilli, F.; Lyly, M.
    Current-penetration patterns in twisted superconductors in self-field.
    2013. IEEE Transactions on Applied Superconductivity, 23, 8200105/1–5. doi:10.1109/TASC.2012.2228733
  49. Stenvall, A.; Siahrang, M.; Grilli, F.; Sirois, F.
    Computation of self-field hysteresis losses in conductors with helicoidal structure using a 2D finite element method.
    2013. Superconductor Science and Technology, 26, 045011/1–10. doi:10.1088/0953-2048/26/4/045011
  50. Stenvall, A.; Tarhasaari, T.; Grilli, F.; Raumonen, P.; Vojenciak, M.; Pellikka, M.
    Manifolds in electromagnetism and superconductor modelling: Using their properties to model critical current of twisted conductors in self-field with 2-D model.
    2013. Cryogenics, 53, 135–141. doi:10.1016/j.cryogenics.2012.06.005
  51. Urbach, E.; Bagrets, N.; Weiss, K. P.
    Implementation of a quality management system at the PHOENIX facility (CryoMaK).
    2013. Fusion Engineering and Design, 88, 2631–2635. doi:10.1016/j.fusengdes.2013.04.052
  52. Vojenciak, M.; Grilli, F.; Stenvall, A.; Kling, A.; Goldacker, W.
    Influence of the voltage taps position on the self-field DC and AC transport characterization of HTS superconducting tapes.
    2013. Cryogenics, 57, 189–194. doi:10.1016/j.cryogenics.2013.08.001
  53. Vostner, A.; Pong, I.; Bessette, D.; Devred, A.; Sgobba, S.; Jung, A.; Weiss, K. P.; Jewell, M. C.; Liu, S.; Yu, W.; Boutboul, T.; Hamada, K.; Park, S. H.; Tronza, V.; Walsh, R. P.
    Benchmarking of mechanical test facilities related to ITER CICC steel jackets.
    2013. IEEE Transactions on Applied Superconductivity, 23, 9500705/1–5. doi:10.1109/TASC.2013.2243895
  54. Wandkowsky, N.; Drexlin, G.; Fränkle, F. M.; Glück, F.; Groh, S.; Mertens, S.
    Modeling of electron emission processes accompanying radon-α-decays within electrostatic spectrometers.
    2013. New Journal of Physics, 15 (8), 083040/1–16. doi:10.1088/1367-2630/15/8/083040
  55. Weiss, K. P.; Urbach, E.; Kraft, G.; Scheller, H.
    Cryogenic mechanical testing of ITER prototype axial breaks.
    2013. Fusion Engineering and Design, 88, 1533–1536. doi:10.1016/j.fusengdes.2013.02.046
  56. Welte, S.; Cristescu, I.; Dittrich, H.; Lohr, N.; Melzer, R.; Michling, R.; Plusczyk, C.; Schäfer, P.
    Setup and commissioning of a combined water detritiation and isotope separation experiment at the Tritium Laboratory Karlsruhe.
    2013. Fusion Engineering and Design, 88, 2251–2254. doi:10.1016/j.fusengdes.2013.03.061
  57. Yang, Y.; Marujama, S.; Kiss, G.; Ciattaglia, S.; Putvinski, S.; Yoshino, R.; Li, W.; Jiang, T.; Li, B.; Varoutis, S.; Day, C.
    Concept desing of fusion power shutdown system for ITER.
    2013. Fusion Engineering and Design, 88, 824–826. doi:10.1016/j.fusengdes.2013.01.055
  58. Zermeno, V. M. R.; Abrahamsen, A. B.; Mijatovic, N.; Jensen, B. B.; Soerensen, M. P.
    Calculation of alternating curent losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications.
    2013. Journal of Applied Physics, 114, 173901/1–9. doi:10.1063/1.4827375
  59. Zermeno, V. M. R.; Grilli, F.; Sirois, F.
    A full 3D time-dependent electromagnetic model for Roebel cables.
    2013. Superconductor science and technology, 26 (5), 052001. doi:10.1088/0953-2048/26/5/052001
Conference Proceedings Articles
  1. Commin, L.; Antusch, S.; Baumgärtner, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
    Assessment of copper based materials fr the water-cooled divertor concept of the DEMO European fusion reactor.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635275, IEEE, Piscataway, N.J. doi:10.1109/SOFE.2013.6635275
  2. Day, C.; Giegerich, T.
    Exhaust pumping of DT fusion devices - Current state-of-the-art and a potential roadmap to a power plant.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635297, IEEE, Pisacataway, N.J. doi:10.1109/SOFE.2013.6635297
  3. Fink, S.; Kim, W. S.; Noe, M.; Zwecker, V.
    Withstand impulse voltage of liquid nitrogen in the presence of gas bubbles.
    2013. International Electrical Insulation Conference (INSUCON 2013), Birmingham, UK, May 29-31, 2013, 46–51, Electrical Insulation Association, Stafford, UK
  4. Giegerich, T.; Day, C.
    The THESEUS facility - A test environment for the torus exhaust vacuum pumping system of a fusion power plant.
    2013. Proceedings of the 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, CA, June 10-14, 2013, Article no 6635290, IEEE, Pisacataway, N.J. doi:10.1109/SOFE.2013.6635290
  5. Heidt, C.; Grohmann, S.; Süßer, M.
    Modellierung des Druckanstiegs in einem Flüssighelium-Behälter bei Zusammenbruch des Isoliervakuums.
    2013. Annual Meeting of the Deutscher Kaelte und Klimatechnischer Verein 2012 / Deutsche Kaelte-Klima-Tagung 2012, Würzburg, November 21-23, 2012. Vol.1, 17–38, Curran Associates, Red Hook, N.Y
  6. Heidt, C.; Grohmann, S.; Schön, H.; Stamm, M.
    Aufbau eines Versuchsstands zur Messung der Vorgänge in einem Flüssigheliumbehälter bei Zusammenbruch des Isoliervakuums.
    2013. Deutsche Kälte- und Klimatagung, 2013 Hannover, CD-ROM, DKV, Hannover
  7. Luo, X.; Giegerich, T.; Day, C.
    Transient gas flow studied by a test particle Monte Carlo approach with ProVac3D.
    2013. 28th Internat.Symp.on Rarefied Gas Dynamics (RDG 28), Zaragoza, E, July 9-13, 2012. Ed.: M. Mareschal. Vol.1, 857–863, American Institute of Physics, Melville, N.Y. doi:10.1063/1.4769632
  8. Luo, X.; Hauer, V.; Ochoa, S.; Day, C.
    Simulation of the thermal radiation heat load of a large-scale customized cryopump with the Monte Carlo ray trace method.
    2013. Proc.of the 24th Internat.Cryogenic Engineering Conf., Internat.Cryogenic Materials Conference 2012, Fukuoka, J, May 14-18, 2012. Ed.: K. Funaki, 111–114, Cryogenics and Superconducting Society of Japan, Tokyo
  9. Müller, R.; Schrank, M.; Süßer, M.
    Optimizing the geometry of venturi tube flow meters.
    2013. Proc.of the 24th Internat.Cryogenic Engineering Conf., Internat.Cryogenic Materials Conference 2012, Fukuoka, J, May 14-18, 2012. Ed.: K. Funaki, 91–94, Cryogenics and Superconducting Society of Japan, Tokyo, J
  10. Radel, B.
    Konzeptionierung von Kryostatvariationen zur Kühlung einer supraleitenden Spule in einer off-shore Windkraftanlage.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013, Dt. Kälte- und Klimatechnischer Verein, Hannover
  11. Ramalingam, R.
    Study of strain transmission of surface bonded FBG based long range displacement sensor for cryogenic application.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013, Dt. Kälte- und Klimatechnischer Verein, Hannover
  12. Ramalingam, R.
    Investigation of thermal cycling response and stability of polymer coated Fiber Bragg Grating sensors at cryogenic temperatures.
    2013. Proc.of the 24th Internat.Cryogenic Engineering Conf., Internat.Cryogenic Materials Conference 2012, Fukuoka, J, May 14-18, 2012. Ed.: K. Funaki, 43–46, Cryogenics and Superconducting Society of Japan, Tokyo, J
  13. Ramalingam, R. K.; Langhans, O.; Süßer, M.
    Robuste Pt1000-Temperaturfühler für kryogene Anwendungen in der Prozessmesstechnik.
    2013. Annual Meeting of the Deutscher Kaelte und Klimatechnischer Verein 2012 / Deutsche Kaelte-Klima-Tagung 2012, Würzburg, November 21-23, 2012.Vol.1, 39–50, Curran Associates, Red Hook, N.Y
  14. Ramalingam, R. K.; Langhans, O.; Süßer, M.
    Untersuchungen von Pt1000-Fühler für die Anwendung bei kryogenen Temperaturen.
    2013. Verfahren und Geräte in der Temperatur und Feuchtemesstechnik : TEMPERATUR 2013, Berlin, 5.-6. Juni 2013, 79–83, PTB, Braunschweig
  15. Ramalingam, R.; Neumann, H.
    Characterization of fiber Bragg grating sensor in a high speed rotating pipe.
    2013. 20. Internationale Fachmesse für Sensorik, Mess- und Prüftechnik ’Sensor und Test’, Nürnberg, 14.-16. Mai 2013, 618–622, AMA Service GmbH, Wunstorf. doi:10.5162/sensor2013/D8.4
  16. Schrank, M.; Reiner, A.
    Auslegung eines Gasanwärmers für kryogenes Helium.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013, Dt. Kälte- und Klimatechnischer Verein, Hannover
  17. Schrank, M.; Süßer, M.
    Compilation of an uncertainty budget for cryogenic temperature measurements.
    2013. Proc.of the 24th Internat.Cryogenic Engineering Conf., Internat.Cryogenic Materials Conference 2012, Fukuoka, J, May 14-18, 2012. Ed.: K. Funaki, 307–310, Cryogenics and Superconducting Society of Japan, Tokyo, J
  18. Schrank, M.; Süßer, M.
    Gasdurchflussmessung in der Kryotechnik.
    2013. Annual Meeting of the Deutscher Kaelte und Klimatechnischer Verein 2012 / Deutsche Kaelte-Klima-Tagung 2012, Würzburg, November 21-23, 2012.Vol.1, 51–68, Curran Associates, Red Hook, N.Y
  19. Stemmle, M.; Merschel, F.; Noe, M.; Hobl, A.
    AmpaCity - Installation of advanced superconducting 10 kV system in city center replaces conventional 110 kV cables.
    2013. Proceedings of the International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD2013), Beijing, CHN, October 25-27, 2013, 323–326, IEEE, Piscataway, N.J. doi:10.1109/ASEMD.2013.6780785
  20. Süßer, M.
    Messunsicherheit und Temperaturauflösung in der kryogenen Temperaturmessung.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013, Dt. Kälte- und Klimatechnischer Verein, Hannover
  21. KATRIN Collaboration; Thümmler, T.
    Status and commissioning of the Karlsruhe tritium neutrino experiment KATRIN.
    2013. Fleming, B. [Hrsg.] 11th Conf.on the Intersections of Particle and Nuclear Physics (CIPANP 2012), St.Petersburg, Fla., May 29 - June 3, 2012 Melville, N.Y. : American Institute of Physics, 2013 (AIP Conference Proceedings ; 1560), 94–98
  22. Weiss, K. P.; Bayer, C.; Barth, C.; Bagrets, N.; Goldacker, W.
    High temperature superconduction current leads: A necessary tool for superconducting applications.
    2013. Annual Meeting of the Deutscher Kaelte und Klimatechnischer Verein 2012 / Deutsche Kaelte-Klima-Tagung 2012, Würzburg, 21.-23. November 2012 Proceedings. Vol.1, 204, Curran Associates, Red Hook, N.Y
Reports
  1. Schönung, K.
    Entwicklung des Calibration and Monitoring Systems des KATRIN-Experiments zur Bestimmung der Neutrinomasse.
    2013. Jahresbericht der Carl-Zeiss-Stiftung für das Geschäftsjahr 2011/2012 (Februar 2013)
Presentations
  1. KATRIN Collaboration; Antoni, M.
    Kontinuierliche MMagnetfeldüberwachung am KATRIN-Hauptspektrometer mit einem Sensornetz.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 108.5
  2. Bagrets, N.; Bayer, C.; Weiss, K. P.
    Thermal and thermo-mechanical properties of soft solders for superconducting applications.
    2013. 7th Mechanical and Electromagnetic Effects in Superconductors Workshop (MEM 2013), Aix-en-Provence, France, March 12-14, 2013
  3. Battes, K.; Day, C.; Hauer, V.
    Review and measurement of outgassing rates of stainless steel and polymers.
    2013. 19th Internat.Vacuum Congress (IVC-19), Paris, F, September 9-13, 2013
  4. Battes, K.; Hauer, V.
    Influence of the pre-treatment on outgassing.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Vakuumphysik und Vakuumtechnik, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), VA 3.1
  5. Bayer, C.; Bagrets, N.; Barth, C.; Goldacker, W.; Weiss, K. P.
    Low resistive soldering joints for HTS tapes.
    2013. 7th Mechanical and Electromagnetic Effects in Superconductors Workshop (MEM 2013), Aix-en-Provence, F, March 12-14, 2013
  6. Bayer, C.; Barth, C.; Gade, P. V.; Heller, R.; Weiss, K. P.
    FBI - Measurement facility for high temperature superconducting cable designs.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  7. Beck, A.; Grössle, R.
    First measurements with TApIR (tritium absorption IR-spectroscopy).
    2013. Frühjahrstagung DPG, Sektion AMOP, Fachverband Molekülphysik, Hannover, 18.-22. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), MO 11.6
  8. Beck, A.; Grössle, R.
    First calibration of TApIR (tritium absorption IR-spectroscopy).
    2013. Frühjahrstagung DPG, Sektion AMOP, Fachverband Molekülphysik, Hannover, 18.-22. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), MO 11.5
  9. Bekris, N.
    Surface analysis techniques for the study of plasma wall interactions.
    2013. 3rd EIROforum School of Instrumentation (ESI 2013), Geneve, CH, May 27-31, 2013
  10. Borisevich, O.; Demange, D.; Kind, M.
    Zeolite membrane cascade for tritium extraction and recovery systems.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  11. Bornschein, B.
    Between fusion and cosmology - The Tritium Laboratory Karlsruhe (TLK).
    2013. Wissenschaftliches Kolloquium, Greifswald, 6. Februar 2013
  12. KATRIN Collaboration; Bornschein, B.; Sturm, M.
    Status of the tritium neutrino mass experiment KATRIN.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  13. Boyer, C.; Seo, K.; Hamada, K.; Foussat, A.; Le Rest, M.; Mitchell, N.; Decool, P.; Savary, F.; Sgobba, S.; Weiss, K. P.
    Validation of helium inlet design for ITER toroidal field coil.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  14. Day, C.
    ITER - Der Weg zu einem Fusionskraftwerk.
    2013. Bad Honnefer Industriegespräche, Bad Honnef, 17. Juli 2013
  15. Day, C.
    20 years of customized cryopumps in fusion research.
    2013. 24th National Symposium on Cryogenics (NSC 2013), Ahmedabad, IND, January 21-24, 2013
  16. Day, C.
    Kryovakuumtechnik und Kryopumpen.
    2013. Kryotechnik : Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen ; VDI-Wissensforum, Karlsruhe, 27.Februar - 1.März 2013
  17. Day, C.
    A two-lecture shourt course on cryopumps.
    2013. 24th National Symposium on Cryogenics (NSC 2013), Ahmedabad, IND, January 21-24, 2013
  18. Day, C.; Giegerich, T.
    Non-cryogenic pumps for DEMO.
    2013. 21st Congress ’Materials, Interfaces, Processes: New Challenges for Future Applications’, Catania, I, May 15-17, 2013
  19. Day, C.; Giegerich, T.
    Exhaust pumping of DT fusion devices - Current state-of-the-art and a potential roadmap to a power plant.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  20. Day, C.; Haas, H.; Hanke, S.; Hauer, V.; Luo, X.; Scannapiego, M.; Varoutis, S.
    20 years experience in designing and testing customized cryopumps - A review.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  21. Demange, D.
    Advanced tritium extraction process for HCPB breeding blanke t.
    2013. 17th International Workshop on the Ceramic Breeder Blanket Interactions (CBBI- 17), Barcelona, E, September 12-14, 2013
  22. Demange, D.; Fanghänel, E.; Fischer, S.; Le, T. L.; Priester, F.; Röllig, M.; Schlösser, M.; Simon, K. H.
    CAPER as central and crucial facility to support R&D with tritium at TLK.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  23. Demange, D.; Fanghänel, E.; Gramlich, N.; Le, T. L.; Moosmann, H.; Simon, K. H.; Wagner, R.; Welte, S.
    Integration of a micro-channel catalytic reactor in CAPER to study highly tritiated water handling and processing.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  24. KATRIN Collaboration; Erhard, M.
    Ein Jahr Messungen am KATRIN Monitorspektrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 66.4
  25. Fink, S.; Kim, W. S.; Noe, M.; Zwecker, V.
    Withstand impulse voltage of liquid nitrogen in the presence of gas bubbles.
    2013. International Electrical Insulation Conference (INSUCON 2013), Birmingham, GB, May 29-31, 2013
  26. Fischer, S.; Schäfer, V.
    COATEX: Testing optical coatings for resistance against tritium.
    2013. Frühjahrstagung DPG, Sektion AMOP, Fachverband Molekülphysik, Hannover, 18.-22. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), MO 18.8
  27. Fischer, S.; Schönung, K.; Rolli, R.; Schäfer, V.; Sturm, M.
    Investigation of durability of optical coatings in high purity tritium gas.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  28. Franza, F.; Boccaccini, L. V.; Ciampichetti, A.; Demange, D.; Zucchetti, M.
    Tritium permeation issues for helium-cooled breeding blankets.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  29. Gade, P. V.; Bayer, C.; Franza, F.; Heller, R.; Weiss, K. P.
    Conceptual design of a toroidal field coil for a fusion power plant using high temperature superconductors.
    2013. 23nd International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14-19, 2013
  30. Giegerich, T.; Day, C.
    A metal foil vacuum pump for the fuel cycle of fusion power plants.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Vakuumphysik und Vakuumtechnik, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), VA 1.2
  31. Giegerich, T.; Day, C.
    The THESEUS facility - A test environment for the torus exhaust vacuum pumping system of a fusion power plant.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  32. Giegerich, T.; Day, C.
    The KALPUREX-Process - A new vacuum pumping process for exhaust gases in fusion power plants.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  33. Giegerich, T.; Day, C.
    Theoretical and experimental investigation of metal foil vacuum pumps for pumping and separating hydrogen.
    2013. 19th International Vacuum Congress (IVC 2013), Paris, France, September 9-13, 2013
  34. KATRIN Collaboration; Glück, F.
    Chaotic motion of stored electrons in the KATRIN main spectrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 99.2
  35. Goldacker, W.
    Supraleitung in der Windenergie - Keine Utopie.
    2013. Workshop ’Planung / Errichtung’ des Windenergie-Network, Rostock, 2. September 2013
  36. Goldacker, W.; Grilli, F.; Kario, A.; Vojenciak, M.; Nast, R.; Souc, J.; Gömory, F.
    Coated conductor based low AC loss cable concepts for power applications.
    2013. 26th International Symposium on Superconductivity (ISS 2013), Tokyo, J, November 18-20, 2013
  37. Goldacker, W.; Kario, A.; Grilli, F.; Kling, A.; Vojenciak, M.; Kudymow, A.; Barth, C.; Ringsdorf, B.; Schlachter, S. I.
    High current low loss 2G HTS ROEBEL- and Rutherford cables.
    2013. Materials Research Society Spring Meeting & Exhibit (MRS 2013), San Francisco, Calif., April 1-5, 2013
  38. Goldacker, W.; Kario, A.; Vojenciak, M.; Kling, A.; Jung, A.; Brand, J.; Walschburger, U.
    Properties of Roebel assembled coated conductor cables in the shape of solenoid and pancake coils.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  39. KATRIN Collaboration; Görhardt, S.
    Ausheizphase des KATRIN Hauptspektrometers.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 108.8
  40. Grilli, F.; Chervyakov, A.; Zermeno, V.; Marian, A.; Grasso, G.; Goldacker, W.; Rubbia, C.
    Numerical modeling of MgB₂ conductors for high power transmission.
    2013. 26th International Symposium on Superconductivity (ISS 2013), Tokyo, J, November 18-20, 2013
  41. Grohmann, S.; Süßer, M.
    Conceptual design of pressure relief systems for cryogenic applications.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  42. KATRIN Collaboration; Groh, S.
    Sensitivitätsuntersuchungen zur Detektion von sterilen keV Neutrinos mit einem KATRIN-artigen Experiment.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 99.6
  43. Größle, R.; Beck, A.; Bornschein, B.; Fischer, S.; Kraus, A.; Rupp, S.
    First calibration measurements of an IR absorption spectroscopy system for liquid hydrogen isotopologues.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  44. KATRIN Collaboration; Hag, M.
    Überblick über die Methoden der KATRIN Datenanalyse.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 102.6
  45. KATRIN Collaboration; Harms, F.
    Betrieb des KATRIN Fokalebenendetektors.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 74.4
  46. KATRIN Collaboration; Haussmann, N.
    Prozesssteuerung und Datenanalyse am Monitorspektrometer des KATRIN-Experiments.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 102.8
  47. Heidt, C.; Grohmann, S.; Schön, H.; Stamm, M.
    Aufbau eines Versuchsstands zur Messung der Vorgänge in einem Flüssighelium-Behälter bei Zusammenbruch des Isoliervakuums.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  48. Heidt, C.; Grohmann, S.; Süßer, M.
    Modeling the pressure increase in liquid helium cryostats after failure of the insulating vacuum.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  49. Heller, R.
    Representative device builder points of view - current leads.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  50. Hellmann, S.; Noe, M.
    Influence of different surface treatments on the heat flux from solids to liquid nitrogen.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  51. Holzapfel, B.
    Epitaxial Ba-122 and 11 thin films and heterostructures basic properties and application aspects.
    2013. International Workshop on Novel Superconductors and Super Materials (NS² 2013), Tokyo, J, November 21-22, 2013
  52. Holzapfel, B.
    Epitaxial Ba-122 and 11 thin films and heterostructures basic properties and application aspects.
    2013. 26th International Symposium on Superconductivity (ISS 2013), Tokyo, J, November 18-20, 2013
  53. Hossain, M. S. A.; Motaman, A.; Kim, J. H.; Dou, S. X.; Rindfleisch, M.; Tomsic, M.; Cicek, O.; Kovac, P.; Melisek, T.; Kopera, L.; Kario, A.; Ringsdorf, B.; Runtsch, B.; Jung, A.; Goldacker, W.
    Superior critical current densities obtained in binary MgB₂ cables through various mechanical deformations.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  54. KATRIN Collaboration; Jansen, A.
    Verbessertes Design der Schutzdioden für supraleitende Magnete im KATRIN-Experiment.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 52.31
  55. Jin, H.; Weiss, K.; Wu, Y.; Long, F.; Yu, M.; Han, Q.
    Mechanical performance of the ITER ELM Coils’ bracket material of inconel 625.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  56. Kario, A.; Hossain, M. S. A.; Ringsdorf, B.; Runtsch, B.; Jung, A.; Nast, R.; Rindfleisch, M.; Tomsic, M.; Kim, J. H.; Dou, S. X.; Goldacker, W.
    Investigation of copper electroplated MgB₂ cables with different twist pitch made from mono and multifilament wires.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  57. Kario, A.; Vojenciak, M.; Kling, A.; Jung, A.; Brand, J.; Walschburger, U.; Goldacker, W.
    Solenoid and pancake coils assembled from 5 m long Roebel coated conductor cable.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  58. Kario, A.; Vojenciak, M.; Kling, A.; Ringsdorf, B.; Runtsch, B.; Jung, A.; Grilli, F.; Zermeno, V.; Schlachter, S. I.; Nast, R.; Goldacker, W.; Hossain, S. H.
    Superconductivity activities towards application at Institute for Technical Physics.
    2013. Vortr.: Australian Institute for Innovative Materials (AIIM), Wollongong, AUS, 25.Februar 2013
  59. KATRIN Collaboration; Kraus, M.
    Stabilität und Verteilung der Präzisions-Hochspannung für die KATRIN Spektrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 108.6
  60. Krüger, P.; Grilli, F.
    Experimental results and finite-element simulation of superconductor/ferromagnet heterostructures exhibit potential for significant reduction of hysteretic losses.
    2013. Materials Research Society Spring Meeting & Exhibit (MRS 2013), San Francisco, Calif., April 1-5, 2013
  61. Krüger, P.; Grilli, F.; Takayasu, M.
    Computation of effective critical current density and transient behavior of twisted stacked tape high-current cable.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  62. Kuffner, B.; Richter, T.; Lietzow, R.
    Cryogenic control valves - Measurements of characteristic curves at cryogenic conditions.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  63. Lang, P.; Day, C.; Lehnen, M.; Pautasso, G.
    Plasma control aspects of fuelling - pumping - disruption mitigation.
    2013. 2nd IAEA DEMO Programme Workshop, Wien, A, December 17-20, 2013
  64. KATRIN Collaboration; Leiber, B.
    Testmessungen mit nicht-axialsymmetrischem Magnetfeld am KATRIN-Monitorspektrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 66.5
  65. Leys, P.; Kläser, M.; Schneider, T.
    Superconducting high field magnets.
    2013. VDI-Wissensforum ’Cryogenics’, Karlsruhe, 9.-11. Oktober 2013
  66. Luo, X.; Giegerich, T.; Day, C.
    Monte Carlo simulation of a vapour diffusion pump.
    2013. 19th Internat.Vacuum Congress (IVC-19), Paris, F, September 9-13, 2013
  67. Murra, M.; Brown, E.; Rosendahl, S.; Cristescu, I.; Huhmann, C.; Fieguth, A.; Weinheimer, C.
    Distillation column for XENON1T dark matter project.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 58.1
  68. Näckel, O.; Noe, M.
    Design and test of an air coil superconducting fault current limiter demonstrator.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  69. Näckel, O.; Noe, M.
    Design and test of an air coil superconducting fault current limiter demonstrator.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  70. Nast, R.; Vojenciak, M.; Demencik, E.; Kario, A.; Ringsdorf, B.; Jung, A.; Runtsch, B.; Grilli, F.; Goldacker, W.
    Influence of laser striations on the properties of coated conductors.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  71. Neumann, H.
    Heat transfer to cryogenics - cooling techniques.
    2013. VDI-Wissensforum ’Cryogenics’, Karlsruhe, 9.-11. Oktober 2013
  72. Neumann, H.
    Forum crogenics. Welcome and introduction.
    2013. VDI-Wissensforum ’Cryogenics’, Karlsruhe, 9.-11. Oktober 2013
  73. Neumann, H.
    Thermal insulation.
    2013. VDI-Wissensforum ’Cryogenics’, Karlsruhe, 9.-11. Oktober 2013
  74. Neumann, H.
    Vakuum- und Sicherheitstechnik.
    2013. Seminar Kryostatbau, Karlsruhe, 16-18. Oktober 2013
  75. Neumann, H.
    Thermodynamische Grundlagen.
    2013. Seminar Kryostatbau, Karlsruhe, 16-18. Oktober 2013
  76. Neumann, H.
    Thermische Isolation.
    2013. Kryotechnik : Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen ; VDI-Wissensforum, Karlsruhe, 27.Februar - 1.März 2013
  77. Neumann, H.
    Einführung in die Kryotechnik.
    2013. Kryotechnik : Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen ; VDI-Wissensforum, Karlsruhe, 27.Februar - 1.März 2013
  78. Neumann, H.
    Wärmeübertragung an Kryogene. Kühltechniken.
    2013. Kryotechnik : Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen ; VDI-Wissensforum, Karlsruhe, 27.Februar - 1.März 2013
  79. Niemes, S.
    Tritium measurement in water using bremsstrahlung X-rays and a silicon drift detector.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 75.7
  80. Noe, M.
    Supraleitende Betriebsmittel für die zukünftige Energieversorgung. Stand der Entwicklung und Perspektiven.
    2013. Institutskolloquium, Elektrotechnisches Institut des KIT, 18.November 2013
  81. Noe, M.
    Supraleiter-Transformatoren. Mit hoher Effizienz und mehr Sicherheit in die Zukunft.
    2013. Leistungstransformatoren im täglichen Betrieb, Gelsenkirchen, 2.-3.Dezember 2013
  82. Noe, M.
    Opportunities of high-temperature superconducting power equipment.
    2013. Vortr.: Max-Planck-Institut für Festkörperphysik, Stuttgart, 9. Juli 2013
  83. Noe, M.
    Superconductivity as a key technology from small electronics to large magnet applications.
    2013. Academy-Industry Matching Event on Superconductivity, Madrid, E, May 27-28, 2013
  84. Noe, M.; Goldacker, W.; Holzapfel, B.
    From 2G conductors to practical conductors - What needs to be improved?.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  85. Noe, M.; Sarmiento, G.; Arlaban, T.; Manzanas, R.; Tropeano, M.; Funke, R.; Kovac, P.; Yang, Y.; Mondesert, B.
    Suprapower, a new project towards high power wind generators using superconductivity.
    2013. 12th International Workshop on Large-Scale Integration of Wind Power into Power Systems, London, GB, October 22-24, 2013
  86. Nyilas, A.; Weiss, K. P.; Urbach, E.; Marcinek, D. J.
    Estimation of uncertainty for fatigue growth rate at cryogenic temperatures.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  87. Priester, F.; Röllig, M.
    Post service examination of TMP after stress testing with kg-scale tritium throughput.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  88. Radel, B.
    Konzeptionierung von Kryostatvariationen zur Kühlung einer supraleitenden Spule in einer off-shore Windkraftanlage.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  89. Ramalingam, R.
    Study of strain transmission of surface bonded FBG based long range displacement sensor for cryogenic application.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  90. Ramalingam, R. K.; Langhans, O.; Süßer, M.
    Untersuchung von Pt1000-Fühler für die Anwendung bei kryogenen Temperaturen.
    2013. Temperatur Tagung, Berlin, 5.-6. Juni 2013
  91. Ramalingam, R. K.; Langhans, O.; Süßer, M.; Boguhn, D.
    Untersuchung von Pt1000-Fühler für die Anwendung bei kryogenen Temperaturen.
    2013. Verfahren und Geräte in der Temperatur und Feuchtemesstechnik (TEMPERATUR 2013), Berlin, 5.-6. Juni 2013
  92. Ramalingam, R.; Boguhn, D.; Fillinger, H.; Schlachter, S. I.; Süßer, M.
    Study of robust thin film PT-1000 temperature sensors for cryogenic process control applications.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  93. Ramalingam, R.; Nast, R.; Neumann, H.
    Distributed torsional strain measurement using embedded fiber Bragg gratings array in a 2ⁿsup(d) generation high temperature superconductor tapes.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  94. Ramalingam, R.; Neumann, H.
    Characterization of fiber Bragg grating sensor in a high speed rotating pipe.
    2013. 20. Internationale Fachmesse für Sensorik, Mess- und Prüftechnik ’Sensor und Test’, Nürnberg, 14.-16. Mai 2013
  95. Ricapito, I.; Calderoni, P.; Poitevin, Y.; Aiello, A.; Utili, M.; Demange, D.
    Tritium processing for the European tests blanket systems: current status of the design and development strategy.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  96. KATRIN Collaboration; Röllig, M.
    Tritiumnachweis per β-induzierter Röntgenspektroskopie (BIXS).
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 43.4
  97. Rosendahl, S.; Brown, E.; Cristescu, I.; Fieguth, A.; Huhmann, C.; Murra, M.; Weinheimer, C.
    A cryogenic distillation column for the XENON1T experiment.
    2013. 7th Symposium on Vacuum-based Science and Technology (SVBST2013), Kolobrzeg, PL, November 19-21 2013
  98. Rosendahl, S.; Brown, E.; Cristescu, I.; Fieguth, A.; Huhmann, C.; Murra, M.; Weinheimer, C.
    Efficiency measurements of a pre-seperation stage for the krypton distillation column for the XENON1T experiment.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 107.7
  99. KATRIN Collaboration; Rovedo, P.
    Myon-induzierter Untergrund am KATRIN Hauptspektrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 75.3
  100. Rummel, T.; Moennich, T.; Buscher, K. P.; Schauer, F.; Fietz, W. H.; Heller, R.
    The current leads of the Wendelstein 7-X superconducting magnet system.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  101. KATRIN Collaboration; Rupp, S.
    Raman spectroscopy for the windowless gaseous tritium source of the KATRIN experiment.
    2013. 14th International Workshop on Weak Interactions and Neutrinos (WIN 2013), Natal, BR, September 16-21, 2013
  102. Rupp, S.; James, T. M.; Telle, H. H.; Schlösser, M.; Bornschein, B.
    Enhanced sensitivity of Raman spectroscopy for tritium gas analysis using a metal-lined hollow glass fiber.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  103. Sander, M.; Gehring, R.; Neumann, H.
    LIQHYSMES - Spectral power distributions of imbalances and implications for the SMES.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  104. Santucci, A.; Ciampichetti, A.; Demange, D.; Franza, F.; Tosti, S.
    Impact of tritium solubility in liquid Pb-Li on tritium migration in HCLL and WCLL blankets.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  105. Scannapiego, M.; Day, C.
    R&D design for the cryogenic vacuum pumps of ITER.
    2013. IUVSTA Workshop on UHV Techniques for Large Volume Devices, Gandhinagar, IND, March 19-22, 2013
  106. KATRIN Collaboration; Schams, S.
    Anwendung von Markov-Chain Monte Carlo Methoden in der KATRIN Datenanalyse.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 102.7
  107. Schlachter, S. I.; Brand, J.; Goldacker, W.
    HTS magnet and cryogenic system for radio blackout mitigation experiment.
    2013. 25th Space Cryogenics Workshop, Girdwood, Alaska, June 23-25, 2013
  108. Schlachter, S. I.; Brand, J.; Goldacker, W.; Fillinger, H.; Kario, A.; Ringsdorf, B.; Walschburger, U.
    Radiation blackout mitigation experiment with HTS magnet.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  109. Schlösser, M.
    How one measures the neutrino mass and why one needs Raman spectroscopy for it.
    2013. Vortr.: Instituto Pluridisciplinar, Madrid, E, May 9, 2013
  110. Schlösser, M.; Rupp, S.; Mirz, S.; Fischer, S.
    How can Raman-inactive helium Be made visible in Raman spectra of tritium/helium gas mixtures?.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  111. Schneider, T.
    Supraleitende Hochfeldmagnete.
    2013. Kryotechnik : Grundlagen und Arbeitstechniken, Entwicklungsstand, -tendenzen, Anwendungen ; VDI-Wissensforum, Karlsruhe, 27.Februar - 1.März 2013
  112. Schneider, T.; Kläser, M.
    Temperaturabhängigkeit des kritischen Stroms technischer Supraleiter.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  113. Schönung, K.
    Charakterisierung und Aufbau eines Calibration and Monitoring Systems (CMS) für das KATRIN Experiment und Durchführung erster Messungen.
    2013. Kolloquium der Carl-Zeiss Stiftung, Oberkochen, 20.-21.November 2013
  114. Schönung, K.; Babutzka, M.
    Entwicklung und Durchführung von Testexperimenten für die Rear Section des KATRIN-Experiments.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 99.7
  115. Schrank, M.; Reiner, A.
    Auslegung eines Gasanwärmers für kryogenes Helium.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  116. KATRIN Collaboration; Schwarz, J.
    Status des KATRIN Fokalebenendetektors am KIT.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Physik der Hadronen und Kerne, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), HK 43.5
  117. Shu, W. M.; Cristescu, I.; Michling, R.; Demange, D.; Willms, R. S.; Glugla, M.
    Highly tritiated water processing by isotope swapping.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  118. Sirois, F.; Grilli, F.; Laforest, M.; Wan, A.
    Potential and limits of numerical modelling for supporting the development of HTS devices.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  119. KATRIN Collaboration; Stallkamp, N.
    Magnetfeldoptimierung des LFCS Luftspulensystems für das KATRIN Hauptspektrometer.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 108.7
  120. Stemmle, M.; Merschel, F.; Noe, M.; Hobl, A.
    AmpaCity - Installation of advanced superconducting 10 kV system in city center replaces conventional 110 kV cables.
    2013. International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD2013), Beijing, China, October 25-27, 2013
  121. Stemmle, M.; Merschel, F.; Noe, M.; Hobl, A.
    AmpaCity project Advanced superconducting 10 kV system replaces conventional 110 kV cable system in city center.
    2013. 2013 CIGRE Canada Conference, Calgary, CDN, September 9-11, 2013
  122. Stemmle, M.; Merschel, F.; Noe, M.; Hobl, A.
    AmpaCity project - Worldwide first superconducting cable and fault current limiter installation in a German city center.
    2013. International Electricity Conference & Exhibition (CIRED 2013), Stockholm, S, June 10-13, 2013
  123. Sturm, M.
    KATRIN, an experiment for determination of the v-mass: status and outlook.
    2013. 8th Internat.Workshop on the Dark Side of the Univers (DSU 2012), Armacao de Buzios, BR, June 10-15, 2012
  124. Sturm, M.; Niemes, S.; Michling, R.; Bornschein, B.
    Determination of tritium concentration in water using beta induced x-ray spectrometry with a silicon drift detector.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  125. Süßer, M.
    Low temperature measurement and control technique.
    2013. VDI Wissensforum Cryogenics, Karlsruhe, 9.-11. Oktober 2013
  126. Süßer, M.
    Kryogene Mess-, Regel- und Sicherheitstechnik.
    2013. Seminar Kryostatbau, Karlsruhe, 16-18. Oktober 2013
  127. Süßer, M.
    Messunsicherheit und Temperaturauflösung in der kryogenen Temperaturmessung.
    2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013
  128. Süßer, M.
    Massflow measurement in cryogenic facilites.
    2013. Control and Instrumentation School 2013, CEA Saclay, Gif-sur-Yvette, F, June 13, 2013
  129. Süßer, M.
    Druckabsicherung von He-Kryostaten oder welche Maßnahmen sind erforderlich um ein Druckentlastungssystem als eine sehr zuverlässige Sicherheitseinrichtung zu bewerten.
    2013. Vortr.: Helmholtz-Zentrum Berlin, 27.Februar 2013
  130. KATRIN Collaboration; Thümmler, T.
    Status of the Karlsruhe tritium neutrino experiment KATRIN and commissioning of the spectrometer and detector section.
    2013. DESY-Seminar, DESY Hamburg, 25. Juni 2013
  131. KATRIN Collaboration; Thümmler, T.
    Status of the Karlsruhe tritium neutrino experiment KATRIN and commissioning of the spectrometer and detector section.
    2013. DESY-Physikseminar, DESY Zeuthen, 26. Juni 2013
  132. KATRIN Collaboration; Thümmler, T.
    Inbetriebnahme und Testmessungen des KATRIN Spektrometer und Detektor Systems.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 99.1
  133. KATRIN Collaboration; Trost, N.
    Untergrund druch gespeicherte Elektronen. Simulation und Messvorbereitung am KATRIN-Experiment.
    2013. 77. Jahrestagung der DPG und DPG-Frühjahrstagung, Fachverband Teilchenphysik, Dresden, 4.-8.März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), T 99.3
  134. Varoutis, S.; Day, C.
    Transient rarefied gas flow through short channels at arbitrary pressure ratios.
    2013. Frühjahrstagung DPG, Sektion Kondensierte Materie, Fachverband Vakuumphysik und Vakuumtechnik, Regensburg, 10.-15. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), VA 2.1
  135. Wagner, R.; Demange, D.; Fanghänel, E.; Le, T. L.; Schwarz, M.; Simon, K. H.
    Decommissioning of the PETRA experiment - Status and progress.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  136. Welte, S.; Besserer, U.; Osenberg, D.; Wendel, J.
    Tritium laboratory Karlsruhe (TLK): Administrative and technical framework for isotope laboratory operation.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  137. Yoshida, K.; Murakami, H.; Tsuchiya, K.; Kizu, K.; Kamiya, K.; Koide, Y.; Philips, G.; Zani, L.; Wanner, M.; Barabaschi, P.; Decool, P.; Cucchiaro, A.; Fietz, W. H.; Heller, R.; Michel, F.
    Mass production of the superconducting magnet system for the JT-60SA.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14-19, 2013
Posters
  1. Babutzka, M.; Bornschein, B.; Priester, F.; Röllig, M.; Schneck, F.
    Tritium adsorption and desorption measurements using beta-induced X-ray spectroscopy for KATRIN.
    2013. 19th Internat.Vacuum Congress (IVC-19), Paris, F, September 9-13, 2013
  2. Bagrets, N.; Barth, C.; Weiss, K. P.
    Low temperature thermal and thermo-mechanical properties of soft solders for superconducting applications.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14-19, 2013
  3. Bagrets, N.; Fischer, E.; Sugita, K.; Walter, W.; Weiss, K. P.
    Mechanical properties of carbon wires at low temperatures.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  4. Battes, K.; Day, C.; Hauer, V.
    Tokamak exhaust gas composition measurement via different mass spectrometers.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  5. Commin, L.; Antusch, S.; Baumgärtner, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
    Assessment of copper based materials for the water-cooled divertor concept of the DEMO European fusion reactor.
    2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013
  6. Day, C.; Hauer, V.; Igitkhanov, J.; Kalupin, D.; Valovic, M.; Varoutis, S.
    Towards a physics-integrated view of the fusion fuel cycle.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  7. de Sousa, W. T. B.; Polasek, A.; Dias, R.; Matt, C. F. T.; da Silva, F. A.; de Andrade, R.
    Investigation of 2G coil SCFCL - Modeling and testing.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  8. Fietz, W. H.; Fink, S.; Fuhrmann, U.; Müller, R.; Urbach, E.; Zwecker, V.; Brummer, A.; Oberstarr, R.; Wildner, C.; Wimmer, F.; Woelfl, K.
    Pluggable 56 kV instrumentation feedthrough prototypes for ITER magnets.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  9. Fischer, S.
    Status of the windowless gaseous tritium source of KATRIN.
    2013. 15th International Workshop on Neutrino Telescopes, Venezia, I, March 11-15, 2013
  10. Gehring, M.; Amend, J.; Boffo, C.; Gehring, R.; Goldacker, W.; Revilak, P.; Scheller, H.; Steinmann, J.; Walter, W.; Wirth, I.; Zöller, H.
    Design aspects of a large T solenoid to be used for testing superconductors.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013
  11. Gehring, R.; Goldacker, W.
    VATESTA - A new measurement setup for power and energy applications.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  12. Gil, W.; Bolz, H.; Jansen, A.; Müller, K.; Steidl, M.; Hagedorn, D.
    Test of by-pass diodes at cryogenic temperatures for the KATRIN magnets.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  13. Gleason-Gonzalez, C.; Varoutis, S.; Day, C.
    Divertor region gas kinetics: an engineering approach.
    2013. 40th European Physical Society Conference on Plasma Physics (EPS 2013), Espoo, SF, July 1-5, 2013
  14. Gleason-Gonzalez, C.; Varoutis, S.; Day, C.
    Simulation of neutral gas flow in a tokamak divertor using direct simulation Monte Carlo method.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  15. Goldacker, W.; Elschner, S.; Demencik, E.; Grilli, F.; Kudymow, A.; Vojenciak, M.; Zermeno, V.; Stemmle, M.; Noe, M.
    Experimental 3-phase model of a superconducting AC power transmission cable for transport current and AC-loss investigations.
    2013. 26th International Symposium on Superconductivity (ISS 2013), Tokyo, J, November 18-20, 2013
  16. Grilli, F.; Zermeno, V.; Vojenciak, M.; Brand, J.; Pardo, E.; Kario, A.; Goldacker, W.
    Self-field effects and AC losses in pancake coils assembled from coated conductor Roebel cables.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14-19, 2013
  17. Krüger, P.; Grilli, F.; Takayasu, M.
    Computation of effective critical current density and transient behavior of twisted stacked tape high-current cable.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  18. Kudymow, A.; Elschner, S.; Strauß, S.; Goldacker, W.
    Investigation of current limiting characteristics and of thermal stability at varying fault conditions on different 2G HTS.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  19. Leys, P.; Kläser, M.; Schleissinger, F.; Schneider, T.
    Analysis of the anisotropic critical current behaviour of HTS coated conductors.
    2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013
  20. Richter, T.; Lietzow, R.
    Cryogenic experiences during W7-X HTS-current lead tests.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  21. Scannapiego, M.; Day, C.; Hauer, V.
    Consequences of plasma disruption mitigation by massive gas injection on the ITER torus cryopumping system.
    2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013
  22. Schlösser, M.; Bornschein, B.; Fischer, S.; James, T. M.; Kassel, F.; Rupp, S.; Sturm, M.; Telle, H. H.
    Raman spectroscopy at the Tritium Laboratory Karlsruhe.
    2013. 10th International Conference on Tritium Science and Technology (TRITIUM 2013), Nice, F, October 21-25, 2013
  23. Schlösser, M.; Rupp, S.; Seitz, H.; Fischer, S.; Bornschein, B.; James, T. M.; Telle, H. H.
    A sample-free calibration method for quantitative ra-man spectroscopy of hydrogen isotopologues.
    2013. Frühjahrstagung DPG, Sektion AMOP, Fachverband Quantenoptik und Photonik, Hannover, 18.-22. März 2013 Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.48(2013), Q 43.17
  24. Varoutis, S.; Saglietti, C.; Luo, X.; Day, C.; Zanino, R.
    Experimental and computational investigation of rarefied gas flows through bellows and very short tubes.
    2013. 19th International Vacuum Congress (IVC 2013), Paris, France, September 9-13, 2013
  25. Weiss, K. P.; Bayer, C.; Bagrets, N.
    Mechanical properties of superconductor cable jacket and casing material for cryogenic magnet application.
    2013. Cryogenic Engineering Conf.and Internat.Cryogenic Materials Conf. (CEC-ICMC), Anchorage, Alaska, June 17-21, 2013
  26. Weiss, K. P.; Westenfelder, S.; Purr, B.; Boyer, C.; Foussat, A.
    Mechanical fatigue testing of a TF-He-inlet prototype at cryogenic temperature.
    2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013